|
|
OneDrop™ Ball Bearing Conditioner & Lubricant: Application Guide
- Squirt water and dish soap into shackle openings. Roll car back and forth on track several times to clean ball races.
Flush well with fresh water while rolling car back and forth. Allow time to dry
- Remove cap and cut off tip of sealed pinpoint dispenser
- Apply 1-2 drops of OneDrop™ to ball contact surfaces of track
- Roll car back and forth through the OneDrop™ several times to distribute onto bearings.
- Wipe any remaining OneDrop™ off track
|
PARTNERS
|
